Images are representations only.
Model 66 Pneumatic Stainless Steel Regulator
Brand: Fairchild Industrial ProductsThe Rotork Fairchild Model 66 is a stainless steel pressure regulator for high performance applications with corrosive environments and/or high temperatures.
The Model 66 Stainless steel housing and internals, along with its fluorocarbon elastomers are compatible with a wide range of corrosive materials and difficult operating environments.
The Fairchild Model 66 pneumatic regulator features control sensitivity of 1" water column to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of system pressure changes or conditions.
The Fairchild Model 66 pressure regulator will handle a 500 psi, 35 BAR maximum supply pressure and offers five (5) set point pressure ranges from 0-10 psi, 0-0.7 BAR, 0-70 kPa up to 2-150 psi, 0.15-10 BAR, 15-1,000 kPa.
Features- Stainless Steel and Fluorocarbon
- Control sensitivity to 1" water column
- Large Control Diaphragm area
- Valve Damper system
- Line or Panel Mounting
Specifications
Flow Capacity
- 17 scfm (28.9 m³/hour) at psig: 100 (bar: 7, kPa: 700) Supply & psig: 20 (bar: 1.5, kPa: 150) Set Point
Supply Pressure Effect
- Less than psig: 0.1 (bar: 0.007, kPa: 0.7) for psig: 25 (bar: 1.7, kPa: 170) Change in Supply Pressure
Enclosure, Body Material
- Stainless Steel
BSP Connection
- 1/2" BSPP Female
- 1/2" BSPT Female
- 1/4" BSPP Female
- 1/4" BSPT Female
- 3/8" BSPP Female
- 3/8" BSPT Female
Bonnet Material
- Aluminum
Vent
- Straight
- Tapped Exhaust
Trim Material
- Stainless Steel
- Teflon
Mounting
- Panel Mount
NPT Connection
- 1/2" NPT Female
- 1/4" NPT Female
- 3/8" NPT Female
Sensitivity
- 1 inH₂O (2.54 cm)
Diaphragm Material
- Viton with Teflon on Control Side
Supply Pressure - Maximum
- bar: 35
- kPa: 3,500
- psig: 500
Ambient Temperature Range
- -28° to 149° C (-20° to 300° F)
Pressure Range
- bar: 0 to 10
- kPa: 0 to 1,000
- psig: 0 to 150
Actuator Type
- Knob Adjust
- Screw
Exhaust Capacity - Relieving Units Only
- 1 scfm (1.7 m³/hour) where Downstream Pressure is psig: 5 (bar: 0.35, kPa: 35) Above psig: 20 (bar: 1.5, kPa: 150) Set Point
Elastomers
- Fluorocarbon
Relief
- Non-Relieving - Aluminum Bonnet
- Relieving
