Images are representations only.
Model 200XLR Pneumatic Volume Booster
Brand: Fairchild Industrial ProductsBased on the Model 200 valve body, the Rotork Fairchild Model 200XLR Volume Booster couples two identical units to obtain ultra high flow capacity in both forward and exhaust modes.
As a pilot operated regulator design, the M200 handles up to 250 psig, [17.0 BAR], (1,700 kPa) supply pressure and provides a flow Ultra high capacity of 1,800 SCFM (3,058 m3/HR), which equates to a Cv factor of approximately 18 in both forward and exhaust flow modes.
Features- Forward and exhaust flow capacity of 1800 SCFM (3058 m3/Hr)
- Control sensitivity to 1" water column
- Increased Sensitivity ("L") option
- Separate Control Chamber
- Optional Adjustable By-Pass Needle Valve (includes bubble tight exhaust valve)
Specifications
Ratio
- 1:1
Pipe/Port Size
- 1-1/2"
Pipe/Port Thread Type
- NPT
Approvals & Certifications
- CRN
Max. Supply Pressure
- 250 psig : 17.0 bar : 1700 kPa
Flow Capacity
- In excess of 1500 scfm (2550 m³/hr) (100 psig : 7.0 bar : 700 kPa supply, 1-1/2” NPT connection 40 psig : 2.8 bar : 280 kPa setpoint.
Supply Pressure Effect
- Less than 0.5 psig, : 0.035 bar : 3.5 kPa for 100 psig : 7.0 bar : 700 kPa change in supply pressure.
Exhaust Capacity
- 325 scfm (552.5 m³/hr) where downstream pressure is 5 psig : 0.35 bar : 35 kPa above 20 psig : 1.5 bar : 150 kPa setpoint.
Max. Signal or Output Pressure
- 150 psig : 10 bar : 1000 kPa
Sensitivity
- 1” (2.50 cm) W.C.
Bypass Valve
- Bypass Valve
Ambient Temperature Limits
- -40° F to +200° F (-40° C to 93.3° C)
Body & Housing Material
- Aluminum
Elastomers Material
- Viton (Fluorocarbon)
Diaphragm Material
- Nitrile on Dacron
Trim Material
- Aluminum, Brass, Stainless Steel, Zinc-Plated Steel
Trim Material
- Aluminum
- Brass
- Stainless Steel
- Zinc-Plated Steel
Supply Pressure Effect
- Less than psig: 0.5 (bar: 0.035, kPa: 3.5) for psig: 100 (bar: 7, kPa: 700)
Enclosure, Body Material
- Aluminum Die Cast
Supply Pressure - Maximum
- bar: 17
- kPa: 1,700
- psig: 250
Elastomers
- Fluorocarbon (Viton)
Flow Capacity
- 1500 scfm (2550 m³/hour) at psig: 100 (kPa: 700, bar: 7) Supply
NPT Connection
- 1-1/2" NPT Female
Sensitivity
- 1 inH₂O (2.54 cm)
Exhaust Capacity - Relieving Units Only
- 325 scfm (552.5 m³/hour)
Ambient Temperature Range
- -40° to 93.3° C (-40° to 200° F)
Signal or Output Pressure - Maximum
- psig: 150 (kPa: 1,000, bar: 10)
Diaphragm Material
- Nitrile on Dacron
