Images are representations only.
Model 10 Pneumatic Pressure Regulator
Brand: Fairchild Industrial Products
The Rotork Fairchild Model 10 is a precision pressure regulator designed for applications that require high performance and accurate process control.
Stability of regulated pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the supply valve in accordance with the flow velocity.
The Model 10 features control sensitivity of 1/8" water column and a balanced supply valve to deliver consistent and reliable precision accuracy to maintain your desired set point regardless of supply pressure changes or conditions.
The Fairchild Model 10 pressure regulator will handle a 500 psi, 34 BAR, maximum supply pressure and offers nine (9) output pressure ranges from 0-2 psi, 0-0.15 BAR, 0-15 kPa, up to 5-400 psi, 0.3-28 BAR, 35-2,800 kPa.
The Model 10 precision regulator offers 40 SCFM, 68 m³/hr flow capacity.
Typical Part Numbers are 10212, 10222, 10232, 10242.
Features- High Control Sensitivity of 1/8" water column
- Pressure balanced supply valve
- Separate control chamber
- Aspirator tube design
- Nine pressure ranges available
- Check valve option
- "No Yellow Metals" option
Specifications
Pressure Range
- 0-2 psig : 0-0.14 bar : 0-14 kPa
- 0-10 psig : 0-0.7 bar : 0-70 kPa
- 0-20 psig : 0-1.5 bar : 0-150 kPa
- 0.5-30 psig : 0.03-2 bar : 3-200 kPa
- 1-60 psig : 0.1-4 bar : 10-400 kPa
- 2-150 psig : 0.1-10 bar : 15-1000 kPa
- 3-200 psig : 0.2-14 bar : 20-1400 kPa
- 5-300 psig : 0.3-21 bar : 35-2100 kPa
- 5-400 psig : 0.3-28 bar : 35-2800 kPa
Pipe/Port Size
- 1/4"
- 3/8"
- 1/2"
Pipe/Port Thread Type
- NPT
- BSPP
- BSPT
Approvals
- CRN
Hazardous Areas
- Acceptable in Zones 1–2 (gas, Groups IIA & IIB) and Zones 21–22 (dust).
Max. Supply Pressure
- 500 psig : 35.0 bar : 3500 kPa
Flow Capacity
- 40 scfm (68 m³/hr) @ 100 psig, 7.0 bar, 700 kPa supply & 20 psig, 1.5 bar, (150 kPa) setpoint.
Supply Pressure Effect
- Less than 0.1 psig : 0.007 bar : 0.7 kPa for a 100 psig : 7.0 bar : 700 kPa change in supply pressure.
Exhaust Capacity
- 5.5 scfm (9.35 m³/hr) where downstream pressure 5 psig : 0.35 bar : 35 kPa above setpoint of 20 psig :1.5 bar : 150 kPa.
Sensitivity
- 1/8" W.C. : 0.31 mbar : 0.031 kPa
Actuator Adjustment Type (for Output Pressure)
- Knob
- Screwdriver Adjust
Ambient Temperature Limits
- -40° F to +200° F (-40° C to 93.3° C)
Relief
- Relieving
- Non-Relieving
Tapped Exhaust Vent
- Tapped
Tamper Proof
- Tamper Proof
Bleed Option
- Low Bleed
- Low Flow
- No Bleed/Non-Relieving
Output
- Check Valve
Pressure Gauge Port
- 1/4" NPT
Yellow Metals
- No Yellow Metals
Function Type
- Relieving
- Non-Relieving
Body & Housing Material
- Aluminum
Elastomers Material
- Silicone
- Viton (Fluorocarbon)
Diaphragm Material
- Buna-N on Dacron
Trim Material
- Brass, Zinc-Plated Steel
Mounting Style
- Bracket
- Panel Mount
Control of Upstream or Downstream Pressure
- Downstream/Output
Exhaust Capacity - Relieving Units Only
- 5.5 scfm
- 5.5 scfm (9.35 m³/hour)
- 9.4 m³/hour
Ambient Temperature Range
- -40° to 93° C (-40° to 200° F)
Output Options
- Check Valve
- None
Elastomers
- Buna-N on Dacron
- Fluorocarbon (Viton)
- Silicone
Mounting
- None
- Panel Mount
Relief
- Low Bleed
- Low Flow
- Non-Relieving
- Relieving
BSP Connection
- 1/2" BSPP Female
- 1/2" BSPT Female
- 1/4" BSPP Female
- 1/4" BSPT Female
- 3/8" BSPP Female
- 3/8" BSPT Female
Flow Capacity
- 40 scfm
- 40 scfm (68 m³/hour) at psig: 100 (bar: 7, kPa: 700) Supply & psig: 20 (bar: 1.5, kPa: 150) Set Point
- 68 m³/hour
Trim Material
- Brass
- Zinc-Plated Steel
Actuator Type
- Knob Adjust
- Plunger Operated
- Screwdriver Adjust
- Tamper-Proof
Sensitivity
- 1/8 inH₂O (0.32 cm)
Enclosure, Body Material
- Aluminum
Pressure Range
- bar: 0 to 1.36
- bar: 0 to 28
- bar: 0.034 to 2.04
- bar: 0.068 to 4.08
- bar: 0.136 to 10.20
- bar: 0.204 to 13.60
- bar: 0.34 to 27.20
- kPa: 0 to 137
- kPa: 0 to 2,800
- kPa: 13.6 to 1,020
- kPa: 20.4 to 1,360
- kPa: 3.4 to 204
- kPa: 34 to 2,720
- kPa: 6.8 to 408
- psi: 0.5 to 30
- psig: 0 to 20
- psig: 0 to 400
- psig: 1 to 60
- psig: 2 to 150
- psig: 3 to 200
- psig: 5 to 400
Environmental Protection
- Acceptable for Use in Zones 1 & 2 for Gas Atmosphere, Groups IIA & IIB & Zones 21 & 22 for Dust Atmospheres
NPT Connection
- 1/2" NPT Female
- 1/4" NPT Female
- 3/8" NPT Female
Media
- Compressed Air
- Gas
Vent
- Straight
- Tapped Exhaust
Supply Pressure - Maximum
- bar: 35
- kPa: 3,500
- psig: 500
Supply Pressure Effect
- < 0.007 bar
- < psi: 0.01 (bar: 0.0007, kPa: 0.7)
- < psig: 0.1 (bar: 0.007, kPa: 0.7)
- psig: 0.1 (bar: 0.007, kPa: 0.7) for a psig: 100 (bar: 7, kPa: 700) Change in Supply Pressure
- General Industrial
- Packaging
- Conveyance
- Production Lines
- Assembly
Markets
- Factory Automation
- Automotive
- Heavy Industries
The Model 10 Series regulator use the force balance principal to control the movement of the Valve Assembly that controls the output pressure.
When the regulator is adjusted for a specific set point, the downward force of the Range Spring moves the Diaphragm Assembly downward. The Supply Valve opens and allows air to pass to the Outlet Port. As the set point is reached, the downward force exerted by the Range Spring is balanced by the force of the downstream pressure that acts on the Diaphragm Assembly. The resultant force moves the Supply Valve upward to reduce the flow of air to the Outlet Port.
Outlet pressure is maintained as a result of balance between forces acting on the top and bottom of the Diaphragm Assembly.
